 |
 |
 |
Call us at: 800-360-4146
A typical Stealth-Flex installation consists of sensitive cable, one or more analyzer units and end of line termination kits. Other accessories are added where required.
Installations of less than 1000 feet of sensitive cable require a single zone analyzer (AN-1000) at one end of the cable. The analyzer may be indoors, in which case a length of non-sensitive coax is connected between the end of the sensitive cable, or outdoors, fixed to a fence post or other suitable location. On detection of an alarm, the analyzer's Form C contact will change state. This contact is typically connected to a control panel zone and the system is armed and disarmed by means of the control panel.
Installations of more than 1000 feet require a dual zone analyzer (AN-2000). This is typically located where up to 1000 feet of sensitive cable can be led in each direction along the fence.
If access to gates is required while the system is armed, a bypass switch may be required. The BPS-1 allows the gate to be bypassed manually, while the BPS-2 is operated remotely by means of a relay.
Installations of less than 1000 feet of sensitive cable require a single zone analyzer (AN-1000) at one end of the cable. The analyzer may be indoors, in which case a length of non-sensitive coax is connected between the end of the sensitive cable, or outdoors, fixed to a fence post or other suitable location. On detection of an alarm, the analyzer's Form C contact will change state. This contact is typically connected to a control panel zone and the system is armed and disarmed by means of the control panel.
Installations of more than 1000 feet require a dual zone analyzer (AN-2000). This is typically located where up to 1000 feet of sensitive cable can be led in each direction along the fence.
If access to gates is required while the system is armed, a bypass switch may be required. The BPS-1 allows the gate to be bypassed manually, while the BPS-2 is operated remotely by means of a relay.
Application Note:
Protecting Water Treatment Plants
With a combination of Stealth-Flex and outdoor passive infrared sensors
Protecting Water Treatment Plants
With a combination of Stealth-Flex and outdoor passive infrared sensors
Application Hints